Foundation, Concrete and Earthquake Engineering

Straightening, Bending, Rolling and Cambering of Structural Steel

Material not meeting AST'M A6 tolerances and material that may have become bent or distorted during shipment and handling or in the punching operation may require straightening before further fabrication is attempted. In addition members may become distorted when they are trimmed or, in the case of W, S and M shapes, when they are split into tees. The bend press, generally used for straightening beams, channels, angles and heavy bars, is known commonly as a bulldozer, gag press or cambering press. This machine has a horizontal plunger or ram (or a set of rams or plungers) that applies pressure  at  points along   the  bent  member  to bring it into alignment. Also, the press is used to form long-radius curves in various structural members.

Long plates, which are curved slightly or cambered out of alignment longitudinally, are frequently straightened by a roll straightener. The plates are passed between three rolls. The resulting bending increases the length of the concave side and brings the plates back to acceptable tolerances of straightness.
Leaf Spring Cambering Press
Roll Straightener
Misalignments in structural shapes are sometimes corrected by spot or pattern heating. When heat is applied to a small area, of steel, the larger unheated portion of the surrounding material prevents expansion, causing a thickening of the heated area. Upon cooling the subsequent shrinkage produces a shortening of the member, thus pulling it back into alignment. Commonly, this method is employed to remove buckles in girder webs between stiffeners and to straighten members. Heating must be controlled. A special crayon that changes color or melts at a predetermined temperature is often used as a temperature check. 


A press brake is used to form angular bends in sheets and plates. Curved plates used in tanks and stacks are formed in a plate roll machine. 

The foregoing operations can also be used to induce curvature, rather than remove it.

2 comments:

  1. BEMCO Hydraulics,originally an Engineering Craftsman's shop in the late thirties has risen to be a premier producer of HYDRAULIC PRESS and Portable re-railing equipments. It is located in Belgaum,Karnataka,and a southwestern state in India.Portable re-railing equipment, Light weight re-railing equipment, Hydraulic Re-railing equipment.




    for more details
    please contact
    http://www.bemcohydraulics.net/

    ReplyDelete
  2. Prime Ispat Limited is a full service metal processing manufacturer and metal fabrication
    of the highest quality and integrity.

    ReplyDelete

Followers